SDL Wiki

Style Guide: Function Pages

This guide provides specific instructions for editing or adding your own content to each section of a Function page in this wiki.

Function pages should provide basic information about the SDL functions to allow users to most effectively utilize them in their projects.

General Guidelines

Important note about Macros
The basic function template is also used for macros that have pages in the wiki. For simplicity, the following guidelines for functions will also apply to macros unless a specific difference is noted.

Please observe the following for all function pages:

```||<tablewidth="100%" #000000 style="color: #FF8C00;" :>
~+For Backward Compatibility Only+~

||```

~-Return to Table of Contents-~

== Getting Started ==

1. Begin by going to the page you wish to edit and selecting Edit (Text) or Edit (GUI) in the left column to begin editing.
 {i} ~-Markup info provided here is specifically for use in the Text editor but should work in both.-~
1. Scroll down in the edit window to the section(s) you want to edit.  Add your content following the conventions in this style guide.
1. Find information relevant to your content in the style guide sections below and apply the appropriate formatting as you edit.
1. Preview your work as you go by clicking Preview in the left column.  Preview often and any time you are unsure of formatting. 

~-(Keep in mind that a few things (like Color2 text) don't preview exactly as they parse.)-~

1. Save your work by clicking Save Changes in the left column after you are satisfied with your content and have filled in the Comment field under the editing box. 

For assistance with editing, saving, or wiki-appropriate markup see the Wiki Basics Style Guide or contact us at <<MailTo(ANTI SPAM wiki AT libsdl DOT org)>>.

~-Return to Table of Contents-~

Editing Specific Sections

Title

Do not edit the Title.

The Title section consists of the page heading and its markup:

```= SDL_FunctionName =``` 

For function pages this is the name of the function being described on the page and should match the address of the page.

Example: Page address ```https://wiki.libsdl.org/SDL_CreateWindow``` should have matching title and describe the SDL_CreateWindow() function.

If you believe a change is necessary please submit Feedback from that page or contact us at <<MailTo(ANTI SPAM wiki AT libsdl DOT org)>>.

~-Return to Table of Contents-~

=== Description === The Description section immediately follows the page title and does not have it's own heading.

'''All function descriptions begin with:

```Use this function to```'''
 or very rarely
```Use this macro to```

followed by a clear and concise description of what the function does.

Note: Information presented in this section is meant to be limited. Extended description information for more complicated functions should be placed in the Remarks section instead.

<( |3 30%>If the page describes __a macro__ rather than a function

Action: Use the alternate description (Use this macro to...) and, if necessary, replace the word function with the word macro where appropriate throughout the page.

Note: In some rare cases it has been deemed appropriate to refer to a macro as a function in the wiki. (eg: SDL_QuitRequested()) This is not accidental. Please do not "correct" these instances. If you feel strongly that a change should be made please contact us.

Example: SDL_VERSION()

<( |2 30%>If __another API page__ is referenced in the description

Action: Be sure to hyperlink it and use () outside the link markup if it is a function.

Example: ```SDL_FunctionName(), SDL_StructureName```, SDL_GetThreadName()

<( |3 30%>If __a parameter__ on that page is referenced in the description

Action: Use bold for the parameter name.

Note: This is a very rare occurrence.

Note: If the reference is to the parameter as a concept (ie: the window to do something with) rather than directly to the parameter itself (ie: SDL_Function(window)) do not make it bold.
~-Please don't just make the word bold every time it occurs on the page.-~

~-Return to Table of Contents-~

=== Table of Contents === Do not edit the Table of Contents.

The Table of Contents consists of the following markup and is generated automatically on the parsed page.

```<<TableOfContents()>>```

If you believe a change is necessary please submit Feedback from that page or contact us at <<MailTo(ANTI SPAM wiki AT libsdl DOT org)>>.

~-Return to Table of Contents-~

=== Syntax === The Syntax section consists of a code box that displays the basic components of the function using some specific formatting conventions. Please apply the following conventions when editing this section.

The basic format is as follows: ```{ }

Important! All types and parameters should be vertically aligned.

Markup: Use spaces as necessary to create the correct alignment. Within a code box spacing is fixed-width.

Note: __To be omitted__

Note: __To be included__

* A single space between `returnType` and `SDL_FunctionName`
* Commas at the end of each line before the last if there is more than 1 parameter
* The parentheses enclosing the parameters

Note: Do not remove or alter the code box markup surrounding the function syntax. The starting and ending markup must remain on separate lines above and below the rest of the content in order to generate the code box.

||<( |3 30%>If a function refers to a __callback function__||Action: See the special section on callback functions below.|| ||Note: Callback functions do not get their own pages.|| ||Example: SDL_AddEventWatch(), SDL_AddTimer()||

Example: }

~-Return to Table of Contents-~

Function Parameters

The Function Parameters section provides basic information about each parameter in the function and is presented in table format.

Important!

<( |2 30%>If the only parameter is __void__

Action: Delete the entire Function Parameters section, including the header.

Example: SDL_AllocRW()

Otherwise, function parameters follow this basic format:

``` ||parameter1||description|| ||parameter2||description|| ... ||parameterN||description|| ```

Markup: Use basic table markup and enclose each parameter name in bold markup. All text in the table is left-justified.

Important! All descriptions begin with a lower case letter, end without a period, and are generally not complete sentences.

Example: SDL_SetColorKey()

<bgcolor="#EDEDED">Content-dependent formatting: General

<( |3 30%>If __more than one statement__ must be included in the description

Action: Separate them with a semi-colon (;)

Note: This should be avoided whenever possible. See "If a __more detailed description__ is required to adequately explain a parameter" below for more details.

Example: SDL_PixelFormatEnumToMasks()

<( |4 30%>If a __more detailed description__ is required to adequately explain a parameter

Action 1 : Append the following, verbatim, to the end of the brief description
```; see Remarks for details```.

Action 2: Place the more detailed information in the Remarks section.

Action 3: See "If the __Remarks section is large__" below for more details.

Example: SDL_CreateWindow()

<( |3 30%>If the __Remarks section is large__

Action 1: Create an anchor immediately before the additional comments you are adding to the Remarks section.

Markup: Use ``````, where anchorname is a name of your choosing, to create the anchor in the Remarks section. See Anchors for details.

Action 2: Modify the Remarks link in the parameter description (see Action 1 in "If a __more detailed description__ is required to adequately explain a parameter" above) to the following:
```; see Remarks for details```
where anchorname matches the name you chose for the anchor in Action 1.

<( |2 30%>If __there is a pointer__ associated with the parameter

Action: Avoid mentioning pointers unless they are critical to understanding the parameter or there is little other way to describe it (ie: void*)

Example: SDL_SetColorKey()

<( |2 30%>If a pointer points to __something that is filled in by the function__ or that __has been filled in__

Action: Use the phrase filled in with in the description

Example: SDL_QueryTexturePixels()

<( |4 30%>If the description mentions __a structure that has a page__

Action 1: Use the following pattern to describe the parameter:
the/an ```SDL_StructureName``` structure to or representing

Action 2: Check the table below for structure-specific phrasing.

Note: Be sure to hyperlink the structure name as shown in Action 1 in the type and description columns (as appropriate) except if the row is greyed out (see If the parameter is __for internal use, deprecated, or private__ for details).

Example: SDL_UnionRect()

<( |3 30%>If the description mentions __a structure that does not have a page__

Action: Use the plain English term to describe the structure (ie: SDL_Window == the window) and omit the hyperlink.

Note: Please check the current wiki before selecting this option for wording, as a page may have been created since this was written or since you last checked.

Example: SDL_RenderClear()

<( |2 30%>If the description mentions __an enumeration__

Action: It is not necessary to specifically describe it as an enumeration as above for structures, but DO hyperlink if it has a page except if the row is greyed out (see If the parameter is __for internal use, deprecated, or private__ for details).

Example: SDL_PixelFormat

<( |1 30%>If a description must refer to any other __page in the API__

Action: Create a hyperlink to the page except if the row is greyed out (see If the parameter is __for internal use, deprecated, or private__ for details).

<( |5 30%>If the parameter is __for internal use, deprecated, or private__

Action 1: Make the text in the row grey by including the following, verbatim, in the first cell of the row between the starting table markup and the text:
```<rowstyle="color: #808080;">```

Action 2: Include the reason (ie: internal use, etc.) in parentheses at the end of the description.

Action 3: DO NOT hyperlink any related API pages (ie: structure type) on greyed out parameters.

Example: ```

<rowstyle="color: #808080;">param

Note: Although a rare case, any other table style markup should be included within the same set of angle brackets (<>) and separated from this markup by a space.

<( |3 30%>If a function refers to a __callback function__

Action: See the special section on callback functions below.

Note: Callback functions do not get their own pages.

Example: SDL_AddEventWatch(), SDL_AddTimer()

<( |4 30%>If __a parameter references another parameter__ on that same page

Action: Use bold for the parameter name.

Note: This is a very rare occurrence.

Note: If the reference is to the parameter as a concept (ie: the window to do something with) rather than directly to the parameter itself (ie: SDL_Function(window)) do not make it bold.
~-Please don't just make the word bold every time it occurs on the page.-~

Example: SDL_EnclosePoints()

<( |3 30%>If a description is referring to something that could be __any one of a group of similar items__ (ie: rectangles)

Action: Begin the description with a/an

Example: SDL_HasIntersection()

Note: We realize that this is a somewhat arbitrary distinction depending upon your perspective. If you are unsure whether to use a/an or the it may be helpful to do a quick text search for other pages with the same or similar parameter and copy the format there. Ultimately, though, it's not worth losing sleep over. ;) Just pick one.

<( |3 30%>If a description is referring __to a specific item from a group__ (ie: a specific window)

Action: Begin the description with the

Example: SDL_BlitScaled()

Note: We realize that this is a somewhat arbitrary distinction depending upon your perspective. If you are unsure whether to use a/an or the it may be helpful to do a quick text search for other pages with the same or similar parameter and copy the format there. Ultimately, though, it's not worth losing sleep over. ;) Just pick one.

Note: It would only rarely be appropriate to use the exact same description of a common parameter every time that parameter appears in the API. However, the same or very similar description can be used for many occurrences of the same parameter, enhancing consistency across pages. The following table provides a list of these commonly used descriptions.

Action: When choosing a description phrase for a parameter please check this list to see if any of these common descriptions is applicable, even if a minor modification is required.

<bgcolor="#EDEDED">Content-dependent formatting: Specific

<( |4 30%>If the parameter is __SDL_Palette* palette__

Action 1: Most often this description begins with the SDL_Palette structure to, followed by what to do with the palette (ie: free, modify, etc.).

Action 2: The most common version is the SDL_Palette structure to use

Example: SDL_SetSurfacePalette(), SDL_FreePalette()

Note: Of course other phrases to describe this parameter may become necessary. A text search for "SDL_Palette* palette" should provide you with other descriptions if they arise.

<( |4 30%>If the parameter is __SDL_Rect* rect(s)__

Action 1 - __rect__: Most often this description begins with the/an ```SDL_Rect``` structure representing the rectangle to, followed by what the rectangle is for (ie: fill, draw, intersect, etc).

Action 2 - __rects__: When the parameter is plural it refers to an array of rectangles and will most often begin with an array of ```SDL_Rect``` structures representing the rectangles to, followed by what the rectangles are for.

Example: SDL_FillRect(), SDL_RenderDrawRect(), SDL_IntersectRectAndLine(), SDL_RenderDrawRects()

Note: Of course there are some other phrases to describe these parameters. A text search for "SDL_Rect* rect" should provide you with plenty of other examples of both the singular and plural parameters.

<( |3 30%>If the parameter is __SDL_Renderer* renderer__

Action: A rare exception (at least so far), this description is __always__ the rendering context.

Important! Please use the rendering context for all occurrences of this parameter unless/until it appears in the API in a different context that calls for another description. A text search for "SDL_Renderer* renderer" should be used to determine if this has become the case.

Example: SDL_RenderPresent(), SDL_RenderDrawLine(), SDL_CreateTexture()

<( |5 30%>If the parameter is __SDL_Surface* surface__

Action 1: Most often this description begins with the SDL_Surface structure to, followed by what is happening with the structure (ie: optimize, be locked, etc.).

Action 2: The most common versions are the SDL_Surface structure to update (often used with Set functions) or the SDL_Surface structure to query (often used with Get functions).

Action 3: Some will be best described by the following instead: the SDL_Surface structure representing .

Example: SDL_SetSurfaceRLE(), SDL_LockSurface(), SDL_GetClipRect(), SDL_SaveBMP_RW()

Note: Of course there are some other phrases to describe this parameter. A text search for "SDL_Surface* surface" should provide you with plenty of other examples.

<( |4 30%>If the parameter is __SDL_Texture* texture__

Action 1: Most often this description begins with the texture to, followed by what is being done (ie: create, destroy, etc.).

Action 2: The most common versions are the texture to update (often used with Set functions) or the texture to query (often used with Get functions).

Example: SDL_SetTextureAlphaMod(), SDL_QueryTexturePixels(), SDL_UnlockTexture()

Note: Of course there are some other phrases to describe this parameter. A text search for "SDL_Texture* texture" should provide you with plenty of other examples.

<( |4 30%>If the parameter is __SDL_Window* window__

Action 1: Most often this description begins with the window to, followed by what is being done (ie: minimize, maximize, show, etc).

Action 2: The most common versions are the window to change (often used with Set functions) or the window to query (often used with Get functions).

Example: SDL_RestoreWindow(), SDL_SetWindowTitle(), SDL_GetWindowFlags()

Note: Of course there are some other phrases to describe this parameter. A text search for "SDL_Window* window" should provide you with plenty of examples.

<( |3 30%>If the parameters include __fmt and ...__

Action: For fmt use a printf() style message format string
For ... use additional parameters matching % tokens in the fmt string, if any.

Note: To date this is the only context for the ... parameter. If your case does not follow this pattern exactly it may be necessary to make some adjustments. Please keep them as minimal as possible while creating an accurate wiki entry.

Example: SDL_SetError(), SDL_Log()

Note: Please do not use Includes in this section. It may occasionally be appropriate to copy and paste the parameters and descriptions from one function to another (perhaps with minor changes). This is the preferred method over using an Include.

~-Return to Table of Contents-~

=== Return Value === The Return Value section provides basic information about what, if anything, a function will return upon success or failure.

Important!

<( |3 30%>If the return value is __void__

Note: This is not the same as __void*__! See the table below for void* return values.

Action: Delete the entire Return Value section, including the header.

Example: SDL_FreeSurface()

Otherwise, return values follow this basic format:

```

Returns on success or on failure; call SDL_GetError() for more information. ```

Use the following tables to determine what to replace and with in the standard statement above, and to determine whether some other action is required.

<bgcolor="#EDEDED">Replacements by type

<( 30%>If the return value is __an int (0 or <0)__

Action: Use Returns 0 on success or a negative error code on failure; call SDL_GetError() for more information.

<( |2 30%>If the return value is __an int other than above or a float__

Action: Replace and with the applicable numbers.

Example: Returns 1 on success or 0 on failure; call SDL_GetError() for more information.

<( 30%>If the return value is __SDL_bool__

Action: Use Returns SDL_TRUE on success or SDL_FALSE on failure; call SDL_GetError() for more information.

<( |3 30%>If the return value is __a pointer or NULL__

Action:Replace with an appropriate description of the pointer (usually leaving out any mention of the pointer, as in parameters) and replace with NULL.

Note: See "If the return value type is __a structure__" below for more details.

Example: SDL_HapticOpen(), SDL_GetRenderer()

<( |3 30%>If the return value type is __a structure__

Action: The general format will approximate: Returns an/the ```SDL_StructureName``` representing , for success. The failure statement will depend upon what is returned on failure, if anything. See other Ifs for options.

Note: Ideally in this case, you would search for other functions using the same return value and replicate the phrasing of others as appropriate. (Example search: "returnValue SDL_", where returnValue is replaced with the value you are interested in.)

Example: SDL_CreateRGBSurfaceFrom()

<( |3 30%>If the return value is __void*__

Action:See "If the return value is __a pointer or NULL__" above.

Note: In most cases it will be appropriate to mention the pointer for void*. Ideally, look at other similar functions for guidance.

Example: SDL_LoadFunction(), SDL_SetWindowData()

<( |3 30%>If the return value type is __a Uint__

Action: Replace with a brief, appropriate description of the Uint.

Example: SDL_MapRGBA(), SDL_WasInit()

Note: Very rarely the Uint that is returned is a mask of enumerated values. See SDL_MasksToPixelFormatEnum() for an example of how to handle this.

<( |2 30%>If the return value type is __a char or const char__

Action: Replace with a brief, appropriate description of the returned string.

Example: SDL_GetCurrentVideoDriver()

<( |2 30%>If there are __more than 2__ possible return values

Action: Add any additional values following the applicable rules above. Keep the primary success and primary failure values first and last, respectively, or place them in some other logical order (such as numerical).

Example: SDL_HapticOpened(), SDL_OpenAudio()

<( |4 30%>If the function __does not have a failure state__

Note: It is very rare for a function to be unable to fail. This option covers those rare cases only.

Action 1: If the function only has 1 return value state:
Omit the second part of the statement and omit the call to SDL_GetError().

Action 2: If the function has 2 return values but they don't represent success and failure:
Use Returns or otherwise.
and omit the call to SDL_GetError().

Example: only 1 return state SDL_GetAudioDeviceStatus(); alternate return state SDL_QuitRequested()

<bgcolor="#EDEDED">Replacements by other criteria

<( |4 30%>If __a parameter__ on that page is referenced in the return value

Action: Use bold for the parameter name.

Note: This is a very rare occurrence.

Note: If the reference is to the parameter as a concept (ie: the window) rather than directly to the parameter itself (ie: window) do not make it bold.
~-Please don't just make the word bold every time it occurs on the page.-~

Example: SDL_LoadWAV_RW(), SDL_GL_CreateContext()

<( |3 30%>If the return value mentions __a structure that has a page__

Action: Use the following pattern to describe the return value:
Returns the/an ```SDL_StructureName``` structure representing <some piece of information>

Note: Be sure to hyperlink the structure name as shown.

Example: SDL_UnionRect()

<( |2 30%>If the return value mentions __a structure that does not have a page__

Action: Use the plain English term to describe the structure (ie: SDL_Window == window).

Note: These structures may eventually have pages or other references worth linking to, in which case please follow the instructions above for linking to items with pages of their own.

<( |2 30%>If the return value must refer to any other __page in the API__

Action: Create a hyperlink to the page.

If the page is for an __enumeration__ it is not necessary to describe it as an enumeration as above for structures.

Note: It is extremely rare that an Include is appropriate in this section. If it were to occur it would only be to provide a list of possible return values that are based on an enumeration (or similar). In that case, please see the instructions for creating an Include in the Wiki Basics style guide, and the Include section of the Remarks style guide for details.

~-Return to Table of Contents-~

=== Code Examples === The Code Examples section is meant to contain simple, meaningful examples of how to use the function in a program.

This is one of the few sections that is intended to grow and adjust as users discover more information about a function that would be helpful to share with other users.

For the most part the contents of the Code Examples section will be user-generated and this section will remain as-is until users input their examples.

Please see the Code Examples Style Guide for details on editing this section.

~-Return to Table of Contents-~

=== Remarks === The Remarks section is meant to contain additional information that did not fit in the other sections as well as comments regarding the behavior and use of the function in real-world applications.

This is one of the few sections that is intended to grow and adjust as users discover more information about how a function behaves under different circumstances.

For the most part the contents of the Remarks section will be user-generated and this section will remain as-is until users input their comments.

Note: This is __not__ an appropriate place to post questions, suggestions, bugs, or commentary. Please use the other communication channels available to you, especially the forums and Feedback form, for these types of remarks.

Please see the Remarks Style Guide for details on editing this section.

~-Return to Table of Contents-~

=== Related Functions === The Related Functions section provides a list of other functions specifically referenced by that function or otherwise closely related to it.

This list __should__ include:

This list __should not__ include:

~-An argument can usually be made for a "relationship" between many functions. Including all of them would make these lists much less valuable.-~

Note: In most cases a Related Function reference should be reciprocal - if you include function B on the page for function A then function A should be included on the page for function B.

Markup: Each line should begin with a single blank space and a period followed by the function name enclosed in double brackets to create a hyperlink.

Note: Do not include empty parentheses after the function names in this section. They are all functions so it should be understood/unnecessary.
The basic format for the Related Functions list is:

```

.SDL_FunctionName
.SDL_FunctionName

```

~-Note: The heading was included to more clearly illustrate the blank space before the period at the beginning of each list line. Without this markup the format will not parse correctly.-~

<( 30%>If there is __more than one function__ in the list

Action: List the functions in alphabetical order.

<( 30%>If there are __no related functions__

Action: This section may be removed entirely (including the heading) and added back at a later time if it becomes relevant.

Note: Function pages do not include a "Related Structures" or "Related Enumerations" section as some of the other page types do. If there are important related structures or enumerations they are to be included in the body of the page as links (usually in the Function Parameters or Remarks section). If you feel it is critical that a distinct section for one of these groups be included on a specific function page please submit Feedback from that page or contact us at <<MailTo(ANTI SPAM wiki AT libsdl DOT org)>> to discuss it.

~-Return to Table of Contents-~

The Footer section consists of a horizontal rule followed by two links separated by a comma.

Markup: ```


CategoryAPI, CategoryHeader ```

where CategoryAPI is the same for every function page and CategoryHeader is function-specific with Header varying based on the header file containing the function (see below).

Important! Category names do not always match the header file name. Please consult the following table for the correct name to use so the function will appear in the correct list(s).

Action 1: Do not edit the CategoryAPI link!

Action 2: The ```CategoryHeader``` link may be edited if the page still says (as on a new page) or if the function has been relocated to another header (very rare).

Important! There are a few exceptions to this rule (pages with a category name that does not match their header file). These have been determined by the SDL team. Please do not change an existing page's category name simply because it does not match its header file. If you are concerned that a name is incorrect please submit Feedback from that page or contact us at <<MailTo(ANTI SPAM wiki AT libsdl DOT org)>> to confirm the change first.

Markup: Replace CategoryHeader with the appropriate category name from the table that follows, or contact us at <<MailTo(ANTI SPAM wiki AT libsdl DOT org)>> to find out what category name to use if you are unsure or if the category appears to be missing.

<rowbgcolor="#EDEDED">Header File Containing the Function*

Corresponding Category Name

SDL.h

CategoryInit

SDL_assert.h

CategoryAssertions

SDL_atomic.h

CategoryAtomic

SDL_audio.h

CategoryAudio

SDL_clipboard.h

CategoryClipboard

SDL_bits.h

CategoryBits

SDL_cpuinfo.h

CategoryCPU

SDL_endian.h

CategoryEndian

SDL_error.h

CategoryError

SDL_events.h

CategoryEvents

SDL_gamecontroller.h

CategoryGameController

SDL_haptic.h

CategoryForceFeedback

SDL_hints.h

CategoryHints

SDL_joystick.h

CategoryJoystick

SDL_keyboard.h

CategoryKeyboard

SDL_keycode.h

CategoryKeyboard

SDL_loadso.h

CategorySharedObject

SDL_log.h

CategoryLog

SDL_mouse.h

CategoryMouse

SDL_mutex.h

CategoryMutex

SDL_pixels.h

CategoryPixels

SDL_platform.h

CategoryPlatform

SDL_power.h

CategoryPower

SDL_quit.h

CategoryEvents

SDL_rect.h

CategoryRect

SDL_render.h

CategoryRender

SDL_rwops.h

CategoryIO

SDL_scancode.h

CategoryKeyboard

SDL_surface.h

CategorySurface

SDL_syswm.h

CategorySWM

SDL_thread.h

CategoryThread

SDL_timer.h

CategoryTimer

SDL_version.h

CategoryVersion

SDL_video.h

CategoryVideo

~-*Some exceptions exist. See above.-~

~-Return to Table of Contents-~

Special

This section contains details for special formatting circumstances that are best described separately from the average function page. In general these guidelines should be used in conjunction with the above.

Callback Functions

The presence of a callback function will affect two (2) sections of the main function's page - Function Parameters and Remarks.

Action 1: Use the following formatting specifics in addition to those listed for the main function above whenever a callback function is included on a function page:

<bgcolor="#EDEDED">Function Parameters Section Formatting Details

<( |3 30%>For the parameter that refers to the __callback__ function

Action: Use the following wording, modified as necessary, to describe the parameter:
the function to call <when/why>; see Remarks for details
where the text in <> is replaced with an appropriate description of when or why the callback would be called.

Note: This parameter is often named callback but may have other names (such as filter, fn, or handler).

Example: SDL_LogSetOutputFunction(), SDL_AddEventWatch(), SDL_CreateThread(), SDL_SetAssertionHandler()

<( |4 30%>For the parameter that passes __user data__ to the callback

Action: Use the following wording, modified as necessary, to describe the parameter:
a pointer that is passed to callback
where callback is replaced with the callback function parameter name (if necessary).

Note: In rare cases, often 'Get' functions, this is a pointer to a pointer and should be described as such.

Note: This parameter is often named userdata, but may have other names (such as data or param). It is important to distinguish this parameter from other parameters that are passed to the callback also, but that are not strictly carrying "user data" (such as interval) and from other parameters that are unrelated to the callback function (such as name). See below for details.

Example: SDL_LogSetOutputFunction(), SDL_CreateThread(), SDL_AddTimer(), SDL_LogGetOutputFunction()

<( |2 30%>For other parameters __related to the callback__

Action: There may be other parameters that are passed to the callback function but which are sufficiently different from the __user data__ concept that the wording above does not really apply. In these cases use a description that is appropriate. Often it will still be appropriate to include the phrase passed to callback in these descriptions.

Example: SDL_AddTimer()

<( |2 30%>For additional function parameters __not related to the callback__

Action: Follow any applicable guidelines listed above

Example: SDL_CreateThread()

Action 2: Detail the syntax and parameters of the callback function in the Remarks section using the following __basic format__ with the changes listed in the table below:

  ```{

The function prototype for callback is:

}

to display

The function prototype for callback is:

callback syntax
where its parameters are:

||callback parameter||description||

optional return value info...
optional remarks or details...

<bgcolor="#EDEDED">Remarks Section Formatting Details

<( |2 30%>__Location__

Action: Generally the Remarks section is roughly organized in the same order as the function parameters. Callback details should be located accordingly, or at the top of the Remarks section if there isn't much else, but below any fundamental or critical remarks about the main function as a whole, if present. But, logic should prevail in determining where to place this information if the Remarks section is large. The callback information should be prominent.

Example: SDL_CreateThread(), SDL_AddEventWatch(), SDL_SetAssertionHandler()

<( 30%>__Alignment__

Action: As shown in the basic format above, only the first line should be left-justified. Everything else related directly to the callback should be indented one level (or more) to indicate it's relationship to the callback as opposed to the main function.

<( |2 30%>If the callback parameter is __not callback__

Action: Replace callback in the basic format above with the function parameter name used in the main function to refer to the callback function.

Example: SDL_SetEventFilter(), SDL_CreateThread(), SDL_SetAssertionHandler()

<( 30%>For __"callback syntax"__ in the basic format above

Action: Replace "callback syntax" with the callback function's syntax formatted the same as the main function's syntax. (See Syntax above for details.)

<( |2 30%>If the __callback function name__ requires any explanation

Action: Replace "where its parameters are:" in the basic format above with the following:
where is <some explanation> and its parameters are:
replacing with the name of the callback function and <some explanation> with an explanation of the name (ie: your function name).

Example: SDL_AddEventWatch()

<( |4 30%>For __| callback parameter | description |__ in the basic format above

Action 1: Duplicate the line from above for each parameter in the callback (ie: there should be 2 lines for 2 parameters).

Action 2: Replace "callback parameter" with the name of each callback function parameter using the same formatting instructions as the main function except use ```monospace``` (surrounding backticks) rather than bold to highlight the parameter names in the first column.

Action 3: Replace "description" with an appropriate description of the callback's parameter. See the following for specific parameters.

Example: SDL_FilterEvents(), SDL_LogSetOutputFunction()

<( |2 30%>For the __userdata__ parameter (or comparable)

Action: Use the following text (modified as necessary):
```what was passed as userdata to SDL_MainFunctionName()```
replacing userdata with the appropriate parameter name if necessary, and replacing MainFunctionName with the name of the primary function on the page.

Example: SDL_AddEventWatch(), SDL_AddTimer()

<( |3 30%>If the callback function's __return value__ is important

Action 1: Replace "optional return value info..." in the basic format above with the relevant return value information. Be sure to indent text one level as shown.

Note: Callback return value information may be omitted if it is not important.

Example: SDL_AddEventWatch(), SDL_AddTimer()

<( |2 30%>If there are __"optional remarks or details"__

Action: Replace "optional remarks or details..." in the basic format above with any other relevant information about the callback function. Be sure to indent text at least one level as shown.

Example: SDL_LogGetOutputFunction(), SDL_LogSetOutputFunction()


```{#!wiki comment This section has been left in for future reference if a compat section or similar is ever added back. It does not currently apply to any pages.

Compatibility Functions

Compatibility functions are present in the API for backward compatibility only and thus are treated slightly differently than functions from the current version. Use the following formatting specifics in addition to those listed above for all CategoryCompat pages::

Action 1: The top of every compatibility function page should include the following, verbatim, to be placed below the pragma markup, below DRAFT if present, and above the page title:

}

~-Return to Table of Contents-~

<<Include(SGWikiBasics, , , from="Start SG Include here.", to="##End SG Include here.")>>


[ edit | delete | history | feedback | raw ]

[ front page | index | search | recent changes | git repo | offline html ]

All wiki content is licensed under Creative Commons Attribution 4.0 International (CC BY 4.0).
Wiki powered by ghwikipp.