====== (This is the legacy documentation for stable SDL2, the current stable version; [https://wiki.libsdl.org/SDL3/ SDL3] is the current development version.) ====== = SDL_hid_get_feature_report = Get a feature report from a HID device. == Syntax == int SDL_hid_get_feature_report(SDL_hid_device *dev, unsigned char *data, size_t length); == Function Parameters == {| |'''dev''' |A device handle returned from [[SDL_hid_open]](). |- |'''data''' |A buffer to put the read data into, including the Report ID. Set the first byte of data to the Report ID of the report to be read, or set it to zero if your device does not use numbered reports. |- |'''length''' |The number of bytes to read, including an extra byte for the report ID. The buffer can be longer than the actual report. |} == Return Value == Returns the number of bytes read plus one for the report ID (which is still in the first byte), or -1 on error. == Remarks == Set the first byte of data to the Report ID of the report to be read. Make sure to allow space for this extra byte in data. Upon return, the first byte will still contain the Report ID, and the report data will start in data[1]. == Version == This function is available since SDL 2.0.18. ---- [[CategoryAPI]]