Send a Feature report to the device.
int SDL_hid_send_feature_report(SDL_hid_device *dev, const unsigned char *data, size_t length);
|dev||A device handle returned from SDL_hid_open().|
|data||The data to send, including the report number as the first byte.|
|length||The length in bytes of the data to send, including the report number.|
Returns the actual number of bytes written and -1 on error.
Feature reports are sent over the Control endpoint as a Set_Report transfer. The first byte of
data must contain the Report ID. For devices which only support a single report, this must be set to 0x0. The remaining bytes contain the report data. Since the Report ID is mandatory, calls to SDL_hid_send_feature_report() will always contain one more byte than the report contains. For example, if a hid report is 16 bytes long, 17 bytes must be passed to SDL_hid_send_feature_report(): the Report ID (or 0x0, for devices which do not use numbered reports), followed by the report data (16 bytes). In this example, the length passed in would be 17.
This function is available since SDL 2.0.18.